Product Description
White cement based, one compound mineral textured decorative coating mortar which contains polymer additives and applied with trowel.

Applications
The last floor coating system for thermal insulation systems as a decorative coating. Is used on the interior and exterior facade plaster.

Advantages
Easy application, excellent adhesion, the application provides a decorative appearance. Thermal insulation system applications, wavy appearance can be corrected. Water and frost resistant. Structure resistant to external influences and protects many years. Exterior paints can be applied on it.

Technical Data
Powder Color: White
Water Mixing Ratio: 7 to 8 liters. water / 25 kg. dust
Resting Time: 2-3 minutes
Pot Life: Approximately 1 - 1.5 hours
Application Temperature: +5 °C to 35 °C
Consumption: Approximately 3 to 3.5 kg/m2

Surface Preparation
Application of surface dust, oil must be cleaned of such substances preventing adhesion. UKS Decorative Plaster Primer is applied with a brush or roller before application.

Preparation and implementation of fees
25 kg. Decorative Plaster TECHNO WORLD approximately 7 to 8 liters. preferably as part of clean water into the soil with a low speed mixer or property not to be mixed. Mortars prepared 4-5 minute wait. Ripening Is ready to use mortar mixing again. Mortars prepared from 1 to 1.5 hours should be consumed.

Application Information
Material should be applied to the surface with steel trowel and spread evenly to all surfaces should be thick. Application thickness should be adjusted according to the largest aggregate. The latest within 10 minutes, plastic materials, while still wet plaster with a trowel In a circular motion to fill the winning design. After the application of high temperature up to the surface area of the cement plug Moisten.

Those that should be considered
The outside temperature must be over +5 °C and below +35 C. If posible make the application continuously without break. For breaks divide the surface to areas 20 sqm parts. Plastic trowel to apply the latest within 10 minutes through the film formed on the plaster, do not let it freeze within 24 hours, the risk of freezing or direct sun and wind, avoid open areas from the application. Field after application until the cement plug (approximately 1 week) or heavy snow Be careful not to cold. Using time spent In the past certainly do not add extra dust and water. Products should not be applied in horizontal surface area of the rain. Packing 25 kg paper bags, shelf life in humid environments and in unopened packages with 8 layers stacked on pallets can be stored for six months.

Cleaning the Equipment
With water, Just after application

Disposal
Dispose of empty packaging according to local regulations or recycle. Collect waste material, allow to dry out and harden and then dispose as Construction Waste.