DEFINITION: Walling mortar, that is used for, putting up a gas concrete wall, easy to prepare and applicable, high stability, cement basis and strenghten with chemical polimer additives.

USING AREAS: It is used on the
Internal and external areas,
Putting up a gas concrete wall. Using is simple and practicable.

APPLICATION: The application surface has to be prepared by controlling the application surface whether, in good condition, cleaned and balanced. If the temparature of the surface is more than +25°C, the surface has to be moistened. Mix 25 kg. Gas Concrete Adhesive with 6.5-7 lt water in a container with a low speed mixer until a homogenous mixture without lumps is obtained. This mixture is left for settlement approximately for 5 minutes and by mixing again the mixture gets ready for using.

TECHNICAL SPECIFICATION:

Ingredient: Mortar that is prepared by special cement for putting up a wall that includes powder polimers.

Mixing Ratio: 25 kg. Gas Concrete Adhesive, 6.5-7 It water.

Ground Temparature: +5 °C / +25 °C

Working Period: 60 minutes

Open Time: 25 minutes

Adhesive Power: 1.2 N me (28 days)

Slipping: None

SURFACE PREPARATION AND SUGGESTION:

Application surface has to be purified from the holding on preventing materials such as dust, painting, dirt
The surface has to be moistured before application.
As it is a cement basis material, the hands needs to be protected. Gloves have to be used.

COLOR: Gray

CONSUMPTION: 1,5-2 Kg/m,

PACKAGING AND STORAGE: Shelf life is 10 months in 25 kg kraft bags stored in dry and cool place

Note: The data given above have been calculated in Quality Control Laboratory with 0.5% accuracy under standard conditions. Please apply to our technical department for detailed information.